Key takeaways
- A short, entry-level conveyor dryer suits a small print shop or side-business printer curing a modest daily volume of shirts, while a longer…
A short, entry-level conveyor dryer suits a small print shop or side-business printer curing a modest daily volume of shirts, while a longer, higher-wattage dryer with a wider belt suits a production shop running multiple presses and needing to cure plastisol or water-based ink continuously without slowing down the line; the right pick depends mainly on belt width, tunnel length, and how many garments per hour you need to cure.
Why Conveyor Dryers Matter in Screen Printing
A conveyor (or “curing”) dryer moves printed garments through a heated tunnel on a mesh belt, bringing the ink to the temperature needed to fully cure, most commonly for plastisol ink. Proper curing is what makes a print withstand washing and wear; an under-cured print can look fine off the press but crack or wash out later. Conveyor dryers replace slower flash-cure or heat-gun methods for any shop printing at meaningful volume, since they let one station continuously cure prints coming off the press without the operator manually timing each piece.
Types of Conveyor Dryers
- Entry-level/compact conveyor dryers: Shorter tunnel length and narrower belt, aimed at small shops, hobbyists scaling up, or single-press operations with lower daily volume.
- Mid-size production dryers: Longer tunnels and wider belts to keep pace with multiple presses or higher-volume runs, often with more precise temperature zone control.
- Industrial/high-output dryers: Longest tunnels, highest wattage, and features like multiple heating zones or variable belt speed, aimed at shops running continuous production across several presses or an automatic press line.
At a Glance: Conveyor Dryer Types
| Type | Best For | Key Stated Specs | Limits |
|---|---|---|---|
| Entry-level/compact | Small shops, single-press operations, hobbyists scaling up | Shorter tunnel (commonly in the 4-6 foot range per makers’ listings); narrower belt width; lower total wattage draw | Lower throughput; may need a slower belt speed to fully cure thicker ink deposits |
| Mid-size production | Multi-press shops, steady daily volume | Longer tunnel and wider belt than entry models; adjustable belt speed and temperature controls stated by the maker | Higher upfront cost and larger footprint; may need dedicated electrical circuit |
| Industrial/high-output | High-volume production, automatic press lines | Longest tunnel length, multiple heat zones, highest wattage draw among the category | Significant floor space and electrical capacity required; highest cost tier |
Key Specs to Check Before Buying
Belt Width
Belt width should comfortably fit your largest garment print area plus clearance, including sleeves or wider adult sizes. A belt that is too narrow forces slower throughput or risks ink smearing if garments overlap.
Tunnel Length and Belt Speed
Cure time depends on how long a garment spends in the heated tunnel, which is a function of tunnel length and belt speed together, not belt speed alone. The maker’s manual or spec sheet should state a recommended belt speed range for curing standard plastisol ink; always verify actual cure with a since the manufacturer’s listed numbers are a starting point, not a guarantee for every ink and fabric combination.
Heating Element Type and Wattage
Most conveyor dryers use electric heating elements, with total wattage draw stated by the maker. Confirm your shop’s electrical service, including voltage and amperage, can support the dryer’s power requirements before buying; consult a licensed electrician for any new circuit installation.
Temperature Control and Zones
Basic dryers offer a single temperature control for the whole tunnel; more advanced models divide the tunnel into multiple zones for more precise heat profiles. More zones generally help with specialty inks or thicker deposits that need a gradual temperature ramp.
Ventilation and Exhaust
Curing ovens produce heat and fumes that need adequate shop ventilation. Follow the manufacturer’s manual and any local fire code or electrical code requirements for exhaust and clearance around the unit.
Footprint and Mobility
Check the dryer’s total footprint, including loading and unloading space on either end of the tunnel, against your shop layout. Some models include casters for repositioning; heavier industrial units may be fixed once installed.
Pick This If…
| If you… | Choose |
|---|---|
| Run one press and print at low-to-moderate daily volume | Entry-level/compact conveyor dryer |
| Run multiple presses or need steady daily throughput | Mid-size production dryer |
| Run continuous high-volume or automatic press production | Industrial/high-output dryer |
| Print specialty inks needing a careful heat ramp | A model with multiple temperature zones |
| Have limited shop floor space or a single-circuit electrical setup | The shortest tunnel length that still meets your cure-time needs |
Brands and Market Tiers
Within the screen printing equipment market, brands commonly associated with conveyor dryers include Vastex, Workhorse Products, and Riley Hopkins, which list models across entry-level to mid-size production tunnels aimed at small and growing shops. Higher-output industrial dryers are typically sourced from equipment manufacturers serving larger production shops rather than hobbyist-focused retailers. Buyers should confirm current model specs, tunnel lengths, and pricing tiers directly with the maker or an authorized screen printing equipment dealer, since lineups and availability change.
Fit and Electrical Notes
Measure the full footprint needed, including space for an operator to load garments at the infeed and unload at the outfeed, not just the dryer’s physical dimensions. Confirm your facility’s electrical service matches the dryer’s voltage and amperage requirements, and have a licensed electrician verify capacity before installation, since undersized circuits can trip breakers or create a fire hazard. Also check ceiling clearance and any required gap from walls or flammable materials as stated in the manufacturer’s manual and local fire code.
Alternatives Worth Considering
- Flash cure unit: Suited to partial curing between print stations or for very low-volume shops, but not a substitute for full curing of plastisol ink on its own.
- Heat press for curing: Workable for very low volume or specialty items, but far slower per garment than a conveyor dryer and not practical for production runs.
- Industrial curing oven (non-conveyor): Batch-style ovens suit shops curing garments in batches rather than continuously off a press line.
Warm-Up Time and Shop Workflow
Conveyor dryers generally need a warm-up period to reach stable tunnel temperature before the first garments can be reliably cured, which the maker typically states in the operating manual. Factor this into shop scheduling, especially for shops that print in short bursts rather than continuous runs, since starting the dryer well before the press run begins avoids sending early garments through an under-temperature tunnel. Some shops leave the dryer running at a lower idle temperature between runs to reduce repeated warm-up cycles, though this adds to overall energy use.
Frequently Asked Questions
How do I know if a print is fully cured?
Many shops use a stretch test or a wash test to check that ink has reached full cure, and some makers and ink suppliers offer temperature strips or infrared thermometers to verify the garment reached the ink’s required cure temperature. Follow the ink manufacturer’s specific cure temperature and dwell time recommendations rather than relying on belt speed settings alone.
What size conveyor dryer does a small home-based shop need?
An entry-level/compact model with a shorter tunnel and narrower belt is generally enough for low daily volume, provided belt speed is set slow enough to reach full cure for the ink used. Confirm the maker’s stated throughput figures align with your realistic daily print count.
Can I cure water-based or discharge ink with the same dryer?
Many conveyor dryers can cure water-based and discharge inks, but these inks often require different temperature and dwell time settings than plastisol. Always follow the specific ink manufacturer’s cure recommendations rather than assuming one setting works for all ink types.
Do conveyor dryers need special electrical wiring?
Many mid-size and industrial units draw significant power and may need a dedicated circuit or higher voltage service than a standard household outlet. Have a licensed electrician assess your shop’s electrical capacity before purchasing a specific model.
How much ventilation does a screen printing dryer need?
Curing ovens release heat and some fume byproducts depending on the ink used, so adequate shop ventilation is important for both equipment performance and operator comfort. Follow the manufacturer’s manual and local fire and building codes for specific ventilation and clearance requirements.
What’s the difference between belt speed settings and actual cure time?
Belt speed controls how long a garment spends inside the heated tunnel, but actual ink cure also depends on tunnel temperature, ink type, and ink deposit thickness. Always verify cure with a wash or stretch test rather than relying solely on a speed dial setting.
Related guides
- Best Stackable Washer and Dryer: Picks and What to Look For (2026)
- Best Ski Boot Dryers and Warmers: Picks and What to Look For (2026)
- Best Motorized TV Lift Stand with Remote Control: Picks and What to Look For (2026)
- Best Fluorescent Light LED Replacements: Picks and What to Look For (2026)
- Best 200 Amp Breaker Switch: Picks and What to Look For (2026)
- Best Plantation Shutters: Picks and What to Look For (2026)